Rigging Blue Marlin Lures with RJ Boyle

(01:00:02)
10.0
1 Vote
Watch Full Video
View Short Trailer
Instructor: RJ Boyle
7606

Rigging blue marlin lures with RJ Boyle, from cable to point. He builds a single hook set on 7x7 cable, leaves elephant ears on the crimp so it can't cut the cable, trims the skirt to the hook, and shows how he marks and files a marlin hook so he can see every stroke of the file.

Description / Review / Instructor

How do you build a hook set for a blue marlin lure?

Rigging blue marlin lures starts with a single hook on cable, crimped and covered in shrink, then fitted so the point sits just outside the skirt. RJ Boyle builds his on 7x7 American Fishing Wire with a double wall copper crimp and a stainless tuna bend hook, and stays with single strand 900 lb cable on his heavy lures.

His fitting rule is precise: rig the lure first, then trim the skirt so the hook sits just outside the tips, as far back as it can go without the eye leaving the skirt. Strands that catch on the hook in rough water make the head swing.

How do you crimp cable without cutting it?

It's tempting to crimp the full sleeve. RJ leaves "elephant ears," two small uncrimped ends, because a crimp pressed past its end can cut the cable as the hook wobbles. He keeps the shrink at the crimp end for the same reason: a hard shrink edge on bare cable can wear through and swim the hook off.

How should you sharpen a marlin hook?

Most anglers file a marlin hook until it feels sharp. RJ colors the point black first, so every stroke shows what he took off. He touches the top of the point and leaves the underside alone, and avoids a four point diamond cut, because an edge under the point keeps cutting once the hook is in.

Inside the video

  • The hook he runs for blue and white marlin, and the open bite hook he switches to for wahoo
  • Shiny shrink with adhesive that stiffens the rig versus flat shrink that stays flexible
  • Why extra hard mono is fine: "at eight knots, a properly rigged lure will swim fine with extra hard mono"
  • A rig pulled from a tournament fish close to 600 lb, with the barb cut way back

Questions About Rigging Blue Marlin Hook Sets

Should you use single strand cable or double twisted cable in a marlin lure?

Both have their crews. RJ Boyle stays with single strand 900 lb cable on his heavy lures, while Black Bart twists cable double on 10/0 to 12/0 hooks because a single strand can swim off the hook over time. RJ says he likes Black Bart's reasoning, so the video shows both.

Does soft mono make a marlin lure swim better?

Some crews run soft mono because they think it gives the lure more action. RJ disagrees: at eight knots, a properly rigged lure swims fine on extra hard mono, and extra hard mono stands up to chafe far better than soft. That chafe resistance is why he rigs with it.

Where does the hook ride in a keel weighted lure?

Up, behind the lure. A keel weighted head sits upright in the water, so the hook rides up behind it, and RJ rigs with that in mind. Its point still sits just outside the skirt tips, as far back as the eye can go while staying inside the skirt.

Why color a hook point before you sharpen it?

A black marker on the point shows exactly where the file has touched. Against a light background, you can't see what you took off; with the marker, each stroke leaves a shiny line, so you know when you've touched the very tip and when to stop.

The Double Cable Argument

RJ stays with single strand on heavy lures, but he credits the other side. For why Black Bart twists the cable double on the big hooks, watch Jack Tullius build the hook sets behind Black Bart lures.

Build a Marlin Hook Set That Holds

Join In The Spread and watch RJ Boyle rig, crimp and sharpen a marlin lure hook set step by step.

Join In The Spread
Read More
Login to leave a review.

User Reviews

sean mclemore 01.10.2023

0

RJ Boyle

RJ Boyle has spent decades fishing the waters off South Florida, where he took up daytime swordfishing after the Florida Keys crews proved it, spent years refining it in the strong Gulf Stream current off his home waters, and built a reputation as a heavy tackle specialist and meticulous bait and lure rigger. He grew up around the Hillsboro Inlet, worked as a full time mate for fifteen years, and now owns RJ Boyle Studio, a tackle shop and charter operation in Lighthouse Point, Florida. His courses cover daytime swordfishing, high speed wahoo trolling, blue marlin lure rigging, dredge fishing, and planer techniques, giving anglers access to a rare breadth of offshore knowledge built from thousands of hours on the water.

Read more

Videos

Load More Videos

We Recommend